|
|
The Rheem Prestige Series® High Efficiency
Two-Stage RASL-JEZ Condensing Unit was
designed with performance in mind. These
units offer comfort, energy conservation and
dependability for single, multi-family and
light commercial applications. A 10 year
limited warranty on all parts.
The Comfort Control System™
provides:
On-Board Diagnostics - The Rheem
exclusive 7-Segment LED Display on the
control board quickly and accurately shows
your contractor the source of system
malfunctions. This feature aids the
contractor in servicing or repairing your unit,
saving you time and money.
Fault Recall - Even if there is a power failure,
this feature will retain the system’s
“operation history” and will display it on the
control board for quick and easy viewing
during service calls.
Active Protection - The feature monitors
your system to prevent the compressor from
operating when potentially harmful
conditions are detected.
Increased Dependability - The thermostat
communication capability can alert you to
any necessary service requirements, giving
you peace of mind that your home comfort is
guaranteed.
|
|
|
The Rheem RGLE and RGPE Prestige
Series™ Super Quiet 80™ Two Stage
Communicating line of Upflow/Horizontal, &
Dedicated Downflow, gas furnaces
equipped with the Comfort Control System is
designed for installation in closets, alcoves,
utility rooms, or attics. The design is certified
by CSA International.
Additional Benefits
The Comfort Control2 System™
Provides advanced service-ability with over
28 on-board diagnostics & fault history
codes by detecting system & electrical
problems. “Call for Service” alert notification
is sent to the thermostat to alert the
homeowner of required service. This
includes seven segment LED & diagnostic
history for easier system diagnostics &
troubleshooting.
Serial Communication Enhanced
When installed with a Serial Communicating
Condensing Unit & user interface control
(RHCTST550CMMS) 500 Series thermostat
this unit offers 4 or 2 wire installation, auto-
configuration, & diagnostic messaging with
full communicating capability.
Motor & Blower Compartment
Energy efficient & quiet ECM 2+
communicating motor. An insulated blower
compartment, a slow-open gas valve,
specially designed draft inducer motor &
blower motor make it one of the most
reliable & quietest furnaces on the market
today.
Low Profile
The “34 inch” [864mm] design is lighter &
easier to handle, making is easily installed &
leaves room for optional equipment &
optimal access for maintenance.
Cabinet & Design
The units are constructed with Pre-paint
galvanized steel cabinets for added reliability
& durability. Easy door removal &
replacement makes for an easier time with
service-ability. Also, all models are equipped
with a molded permanent filter & right or left
side gas & electric inlet connections.
Patented Heat Exchanger
Extremely compact the heat exchanger
provides a faster, more efficient transfer of
heat. It is constructed of stainless &
aluminized steel for the maximum in
corrosion resistance. The construction is so
reliable it’s backed with a conditional limited
lifetime warranty.
Direct Spark Ignition & Remote Sensor
The direct spark ignition is an efficient
method of gas ignition while the remote
flame sensor monitors the flame. For added
safety & personal peace of mind the direct
spark ignition with remote sensor will lock
out system after trial for ignition if main
burner fails to ignite.
Furnace Control
All models feature an integrated board & are
equipped with humidifier & electronic air
cleaner hookups for added heating capacity
& efficiency.
Air Quality & Control
There is an improved & upscale cooling
efficiency when matched with rated
condensing units & coils. Along with
constant CFM & Dip switch settings for
selectable cooling airflow, there is an On-
demand dehumidification terminal for
improved comfort in cooling mode.
|
|
|
|
|
|
Efficient performance
The XL20i is among the industry’s most
efficient heat pumps available, with a rating
up to 19.00 SEER and HSPF up to 9.0. The
XL20i has two compressors: one for milder
weather and a second larger compressor for
those extremely hot days. It’s like having two
units in one.
ComfortLink™ II communicating capability
ComfortLink™ II communicating technology
(available when matched with
communicating indoor units) connects all of
your key components so your system
automatically charges, configures and
calibrates for optimal performance and
efficiency through the lifetime of your
products.
Durable, quiet and economical
Increased efficiency may substantially lower
your home cooling costs. Its multi-stage fan
motor adjusts speed to quietly provide
maximum comfort, and materials for all
components are tested again and again for
long-lasting performance and durability.
Cleaner, healthier indoor air
Add Trane CleanEffects™ to your system for
advanced air filtration that removes more
dust, pollen and other irritants from
conditioned air for a cleaner, healthier, more
comfortable home.
|
|
